DIY Tips for Flawless Tile Installation

Measure and Mark:

Lay out your tiles and mark the center of the room. Snap chalk lines to guide your tile placement.

Start from the Center:

Begin tiling from the center of the room outward. This ensures a symmetrical and even layout.

Use Spacers:

Use tile spacers to ensure uniform gaps between tiles. This creates a professional finish and prevents the tiles from shifting.

Leveling Clips and Wedges:

Consider using leveling clips and wedges to keep tiles level during installation. These tools ensure a flat and even surface.

Apply Adhesive:

Apply thin-set adhesive to the subfloor using a notched trowel. Comb the adhesive in one direction to create uniform ridges.

Press Tiles into Place:

Carefully press the tiles into the adhesive, ensuring they are level and aligned with the guidelines. Tap each tile gently with a rubber mallet to secure it.

Clean Excess Adhesive:

After installing a few tiles, use a damp sponge to wipe away excess adhesive from the surface. This prevents smudges and ensures a clean finish.

Let Adhesive Dry:

Allow the adhesive to dry completely before walking on or grouting the tiles. Follow the manufacturer’s recommended drying time.


Once the adhesive is dry, apply grout to the joints between the tiles. Use a grout float to spread the grout evenly, then wipe away excess grout with a damp sponge.

Seal the Grout:

To protect the grout from stains and moisture, apply a grout sealer after it has dried completely. This step enhances the durability and appearance of your tiled surface.