Fix Shark Vacuum Not Sucking: Troubleshooting and Solutions




Fix Shark Vacuum Not Sucking: Troubleshooting and Solutions

Fix Shark Vacuum Not Sucking: Troubleshooting and Solutions

Is your Shark vacuum cleaner not sucking up dirt and debris like it used to? Don’t worry, you’re not alone. This is a common problem that can be caused by a number of factors. In this article, we’ll walk you through the steps of troubleshooting and fixing a Shark vacuum that’s not sucking.

1. Check the Filter

The first thing you should check is the filter. A dirty or clogged filter can restrict airflow and prevent the vacuum from sucking properly. To clean the filter, simply remove it from the vacuum and rinse it with water. Let the filter dry completely before reinserting it.

2. Check the Hose

The next thing to check is the hose. A kink or blockage in the hose can also restrict airflow and prevent the vacuum from sucking properly. To check the hose, simply disconnect it from the vacuum and inspect it for any kinks or blockages. If you find a kink, straighten it out. If you find a blockage, remove it.

3. Check the Brush Roll

The brush roll is the part of the vacuum that actually sweeps up dirt and debris. If the brush roll is worn or damaged, it won’t be able to pick up dirt and debris effectively. To check the brush roll, simply remove it from the vacuum and inspect it for any wear or damage. If the brush roll is worn or damaged, replace it with a new one.

4. Check the Belt

The belt is what drives the brush roll. If the belt is broken or loose, it won’t be able to turn the brush roll and the vacuum won’t be able to suck up dirt and debris. To check the belt, simply remove the bottom plate of the vacuum and inspect the belt. If the belt is broken or loose, replace it with a new one.

5. Check the Motor

If you’ve checked all of the above and your Shark vacuum is still not sucking, the problem may be with the motor. The motor is what powers the vacuum and if it’s not working properly, the vacuum won’t be able to suck up dirt and debris. To check the motor, simply unplug the vacuum and remove the bottom plate. You should be able to see the motor. If the motor is making a strange noise or if it’s not spinning, it may need to be replaced.

6. Contact Shark Customer Service

If you’ve tried all of the above and your Shark vacuum is still not sucking, you may need to contact Shark customer service. They may be able to help you troubleshoot the problem or send you a replacement vacuum.

Conclusion

If your Shark vacuum is not sucking, don’t despair. By following the steps in this article, you can troubleshoot and fix the problem yourself. However, if you’re not comfortable working on your vacuum, you can always contact Shark customer service for help.